We do not support single-family homes at this time.

Request a quote
Call us

Hanwha Vision Wisenet cameras in Alberta and BC

Hightower designs, installs and fully supports Hanwha Vision cameras, recorders and video software end to end for commercial buildings, from Edmonton, Calgary and Red Deer to Kelowna, Vancouver and Victoria.

About Hanwha Vision

Hanwha Vision, formerly Hanwha Techwin, makes the Wisenet line of security cameras, network video recorders and video software. The range covers bullet, dome, PTZ and multi-sensor cameras, AI cameras that tell people and vehicles apart, licence plate cameras, and Wisenet WAVE video management software. Hanwha Vision cameras support ONVIF and work with major video platforms such as Genetec and Milestone.

What we install from Hanwha Vision

Wisenet AI cameras

Bullet, dome and turret cameras with built-in AI that tells people from vehicles, so alerts and searches skip swaying trees and headlights.

Multi-sensor and PTZ cameras

Multi-directional cameras that cover a whole corner or lot from one mount, and PTZ cameras that zoom in on gates and yards.

Wisenet recorders

Network video recorders sized to your camera count and how long you need to keep footage.

Wisenet WAVE video software

Video management software for live and recorded video across one site or many, from a desk or the mobile app.

Choosing the right Hanwha Vision setup

Plan each camera by what it has to capture: faces at entrances, licence plates at gates and parkade ramps, or a wide view of a lot. Hanwha Vision makes models for each, including multi-sensor cameras that cut the number of mounts on a large building. Then choose where video records: a Wisenet recorder for a single site, Wisenet WAVE across several, or a Genetec or Milestone platform you already run. We plan the cameras, recording and PoE switches together, so every camera has the power and bandwidth it needs.

Adding Hanwha Vision to an existing system

Because Hanwha Vision cameras support ONVIF and integrate with major video platforms, they can often join a system you already run and replace older cameras one at a time as they fail. We check your recorder or software, reuse the cabling worth keeping, and replace the worst cameras first. If nobody has the admin login for a system you own, we help you get it back.

Hanwha Vision, fully supported end to end

One team handles your Hanwha Vision system from the first plan to years of service.

We design the camera layout, run the cabling, install and aim the cameras, set up recording, analytics and remote viewing, and hand over admin access and full documentation. After launch we support your team and keep the system updated and serviced for its life.

Design and quote

We plan the right Hanwha Vision setup for your building and give you a clear, written quote.

Supply

We source genuine Hanwha Vision equipment and licences for your project.

Install

Our technicians install and wire every device to a clean, professional standard.

Program and integrate

We configure Hanwha Vision and connect it to your other systems, from cameras to alarms.

Train your team

We show your staff or property managers how to use Hanwha Vision day to day.

Service and repair

Ongoing support, repairs, updates and maintenance plans for the life of the system.

Why choose Hightower for Hanwha Vision

We support what we install

We don’t install Hanwha Vision and disappear. The same team that designs and installs your system services it for years after.

Brand-independent advice

Because we install 27 brands, we’ll tell you honestly whether Hanwha Vision is the right fit for your building, and what we’d pair it with.

Full documentation

Every Hanwha Vision device, login and setting is documented and handed over, so you’re never locked out of your own system.

Local teams across Alberta and BC

Offices in Edmonton, Calgary, Red Deer and Kelowna mean local technicians for Hanwha Vision installs, service and takeovers.

Often paired with Hanwha Vision

Brands we regularly install alongside Hanwha Vision to build a complete system.

Comparing camera brands? See Axis, Avigilon and Uniview, or read about security cameras.

Stuck with a system nobody will fix?

We service, repair and take over Hanwha Vision and Wisenet cameras installed by other companies, and document everything so you’re never stuck.

Hanwha Vision installation in Edmonton, Calgary and across BC

Our technicians install and support Hanwha Vision in Edmonton, Calgary, Red Deer and Lethbridge, and across BC in Kelowna, Penticton, Vancouver and Victoria.

Main marketAlbertaProvince-wide service, with offices in Edmonton, Calgary and Red Deer.
Main marketBritish ColumbiaOffice in Kelowna, supporting the Okanagan, the Thompson, the Lower Mainland and Vancouver Island.

See all service areas. Alberta and BC are our main markets, and we support customers right across Canada and in the USA, with a parachute team ready to go anywhere. Ask us about it.

Hanwha Vision questions

Is Hanwha Vision the same company as Hanwha Techwin and Wisenet?

Yes. Hanwha Vision is the new name for Hanwha Techwin, and Wisenet is the name of its camera, recorder and software line.

Do Hanwha Vision cameras work with Genetec or Milestone?

Yes. Hanwha Vision cameras integrate with major video platforms, including Genetec and Milestone, and support ONVIF. We confirm the integration for your software and version during design.

What is Wisenet WAVE?

Wisenet WAVE is Hanwha Vision’s video management software. It shows live and recorded video and lets you search and export clips across one site or many, from a desk or the mobile app.

Can Hanwha Vision cameras read licence plates?

Yes. Hanwha Vision makes cameras for licence plate recognition at gates, parkade ramps and service lanes. We plan the angle and lighting so plates are readable day and night, and put up clear camera signs in line with Alberta and BC privacy guidance.

Are Hanwha Vision cameras NDAA compliant?

Hanwha Vision publishes compliance information for its products, including NDAA. If your project needs compliant equipment, tell us and we’ll confirm it for every model we quote.

Do you install Hanwha Vision in Edmonton, Calgary and across BC?

Yes. We install and support Hanwha Vision across Alberta, including Edmonton, Calgary, Red Deer and Lethbridge, and in BC, including Kelowna, Penticton, Vancouver and Victoria.

Can you take over an existing Hanwha Vision system?

Yes. We service, repair and take over Hanwha Vision and Wisenet systems installed by other companies, help you regain admin access to systems you own, and document everything for you.

Can Hanwha Vision cameras be watched after hours?

Yes. We can plan remote video monitoring through our monitoring partner and confirm the setup for your cameras during design. See video monitoring.

More answers: Security camera questionsGlossary: NVRvideo analytics

Get a Hanwha Vision quote

Tell us about the building and what the cameras need to see. We’ll recommend the right Wisenet cameras and recording and book a site visit.

Call and a real person answers, 24/7 for emergencies.